ErgoJust and ErgoJust ICU Cart Installation and Functionality Guide
3-16
August 22, 2017
Replacing a basket/handle
This procedure replaces a damaged basket and/or handle.
It is recommended using an assistant to avoid injury or damage to the
equipment when removing the video pole.
Remove the video pole
1. Remove the video pole (see page 3-3) and then return to step 2 below.
Remove the basket
2. Bend the middle of the basket (
A
) slightly away from the handle and swing the bottom of the
basket (
B
) towards yourself until the two basket mounting tabs snap free from the two
mounting holes (Figure 2).
Figure 2: Removing the basket from the handle.
3. Press in on the left side of the basket or, using a flat blade screwdriver, carefully pry the side of
the basket away from the handle (Figure 3) until the basket mounting tab is free from the side
mounting hole.
Figure 3: Carefully pry the side of the basket away from the handle and pull basket down.
4. Carefully pull downward on the basket until the other side is free from the handle and set the
basket aside.