ErgoJust and ErgoJust ICU Cart Installation and Functionality Guide
3-8
August 22, 2017
Mounting the computer bracket
1. Mount the computer bracket to the bottom of the video pole using the furnished three
mounting screws and a 4mm allen wrench (Figure 1).
Figure 1.
Mounting the computer
1. Loosen the six securing knobs (Figure 1).
NOTE:
There are two securing knobs on the other side of the computer cage, which are not
shown in Figure 1. If necessary, use these two knobs to adjust the height computer cage.
2. Slide the computer into the computer cage.
3. Adjust the securing bracket as needed for a tight fit on the computer.
4. Tighten the four securing knobs.
Figure 1.