ErgoJust ICU Cart System
August 22, 2017
4-3
Removing the video pole
The video pole may on occasion need to be removed during transportation to fit the cart through an
unusually small entryway, access cables inside the video pole, or replace the video pole.
It is recommended to use an assistant when mounting the video pole to
avoid injury or damage to the equipment.
Removing the video
pole mounted with the
PTZ or HD PTZ video
camera
1. Unplug the video camera cable (Figure 1).
2. Unplug the video camera and IR light power cables.
Figure 1: Unplug video camera cable and video camera and IR light power cables.
IMPORTANT
: Do NOT remove the mounting screws during the following step. If the
mounting screws are removed, the mounting plate(s) will slide down. Ensure the plates are
orientated with the
convex
side of the plate pointing inward toward the bottom mast (Figure 2)
when remounting the video pole.
Figure 2: Proper mounting plates orientation.