27
4
Start/Stop Averager – Active in Sensory Nerve testing
Briefly press the button on the handle.
Run train – Active in F wave
Briefly press the button on the handle
5*
(See below)
New Site Button – Active in Motor and Sensory Nerve testing
Briefly press the button on the handle.
Clear – Active in F wave
Briefly press the button on the handle.
Run Train – Active in RNS
Briefly press the button on the handle.
Next Site – Active in Motor, Sensory, F wave and H Reflex
Press and hold down the button on the handle for at least 2 seconds.
6*
(See below)
Single Stimulus Button
Momentarily press the button on the handle.
Repetitive Stimulus Button
Press and hold down the button on the handle for at least 1 second.
Stop
To stop the repetitive stimulation, press the Repetitive Stimulation button again.
7
Stimulus Intensity Control Wheel
To increase or decrease the current intensity, rotate the wheel.
Alternatively, the mouse wheel or the Stimulus Intensity control knob on the control panel can be used.
Reset
To reset the intensity to its zero level, press the
Reset Stimulation Intensity
key on the control panel.
*Buttons 5 and 6:
Button 5 has the same function as:
•
The footswitch, pedal
A
•
Function key on the Keypoint.NET application
Button 6 has the same function as:
•
The footswitch, pedal
C
•
Function key on the Keypoint.NET application
Constant Current Stimulators
Single CC Stimulator
Multi CC Stimulator
Power ON Indicator
The green light (LED) indicates that the stimulator power is On.
