Electronic pellet burner controller - NPBC-V6T-2
Work with Touch display
The NRC-8 control module has a touch sensor positioned over the entire screen area. The control
of the controller is made through the settings menus, and depending on the type of screen and the
type of parameter set, appears a virtual numeric or alphanumeric keypad, delete button, navigation
buttons and others. When “selecting” one of the virtual buttons, you must touch the image of this
button, if it possible in its central part on the screen, to avoid activation of nearby buttons.
For each active area on the screen there is an indication for when it is touched and selected, there
is a low beep sound. When pressing a button its image become lighter. On the settings screen a
current field, which is edited, is framed and it is in lighter background. If the parameter is numeric,
in the field over the keyboard an information is appeared for the permissible range of it’s value.
If the entered number is outside the permissible range, it will be enclosed in a red frame. In this
case, if you change the focus to another parameter or exit the setup menu, a continuous beep will
sound and the incorrectly entered parameter will restore its old possible value.
The selection of another parameter for editing can be done with the "<" or ">" buttons, by pressing
them in one or the other direction. The easier way is to tap the "Virtual place" where the parameter
that must be edited is.
When a menu type screen with sequentially lines is displayed, the selection of the function is made
by shortly touching it. When the menu has more positions than the rows that could be displayed on
the screen, then the screen has to be moved up or down so that and the another part of the menu to
be visible. This can be done with the up or down arrow buttons that will move the current menu
row. The easier way is to touch and hold your finger on one of the visible rows on the screen, then,
without removing your finger from the screen, to move it in the required direction, which will
move the visible part of the menu.
User Manual / ver. 1.2
http://www.naturela-bg.com/en/
page 14 of 41
"Virtual buttons"
Touching the places with
images of buttons is
equivalent to pressing them
"Virtual place"
Touching this field
you will mark
parameter for enter
a new value
Marked field on
the parameter which
will be entered
Button to delete
one symbol from the right
to the left
Exit button to the main
screen and record
the edited parameters
Permissible range of
the ''Duration'' parameter
