Electronic pellet burner controller - NPBC-V6T-2
Timers
– Setting and activating time intervals in which the operation of the burner to be allowed
and the temperature to which the boiler to heat. If at least one of the three timers is active, the
burner will only operate in the intervals indicated by the active timers! Outside these intervals, the
burner will be extinguished. Of course, other factors will be important for the ignition of the
burner, such as: temperature of the water in the boiler, condition of the OD input, condition of the
room thermostat, etc.
The time in the column “On” must be before the time in the column “Off”! If necessary, set the
“Off” time first, to provide larger range for the “On” setting
Information whether the timers are active, when and what will be their next on/off activation and
what is the set temperature from the timer, you can see on the main screen in the information
field.
Select fuel
– From this menu you can select preset fuel profile, which is currently in use. All
parameters for the different profiles are set from
"Service settings"»"Burning setup"»"Fuel
X"
.
User Manual / ver. 1.2
http://www.naturela-bg.com/en/
page 25 of 41
Timer activation key
The timer is valid only
for the days of the week
glowing with green LED
Days of the week
Set temperature
