Electronic pellet burner controller – NPBC-V3C-1/ NPBC-V4C-1/ NPBC-V4E-1
Select Fuel –
Select the preset fuel profile settings corresponding to the currently used fuel. All
parameters for each profile must be set from Burning Setup menu in Factory Settings:
Info Fields
– Set the parameters to be displayed in the information fields on the main screen from this
menu.
Choose the information to be displayed for each field from the following list:
•
Flame level
– Level of illumination, measured by the photo sensor
•
Exhaust fan
– Current speed of the exhaust fan
•
Timers
– If there are any active timers, this field shows when is the next action and what is it
(on/off)
•
Power
– The current calculated power of the burner
•
Temp DHW
– Temperature in the hot water heater
•
Exhaust temp
– Temperature of the exhaust gases
User Manual / ver 3.11
http://www.naturela-bg.com/en/
page 22 of 37
Order of the fields
and their numbers
Choose the information
to be displayed
for each field
