Electronic pellet burner controller – NPBC-V3C-1/ NPBC-V4C-1/ NPBC-V4E-1
C
HANGES
IN
MANUAL
FOR
THE
WORK
AND
THE
SOFTWARE
OF
THE
CONTROLLER
User
Manual
version
Changes
Page
3.2
•
Software version 27/14.
•
New way of dismissing the alarms for registered problems. Most of them
are automatically dismissed as soon as the reason for them is no longer
present. Alarms caused by more serious events require manual dismissal by
pressing the left navigation button "◄" for more than 2 seconds.
•
New appearance of the "Information" screen and the "Equipment" menu
1
11
16
17
3.3
•
Software version 28/14.
•
Alphabetical order of the languages: Bulgarian, English, Latvian, Portugal
and Spanish.
•
Added option to work with additional "Control module" with room
thermostat functions NRC-6 SV
3.4
•
Software version 31/15.
•
In case the burner is currently off (due to reached set temperature, for
instance), but it is about to turn on and if there is a timer scheduled to turn it
off in 10 minutes or less, the burner will remain off, because otherwise the
extinguishing procedure may begin before the fire is stabilized.
•
If OD input activates during Ignition or Unfolding procedures, the
extinguishing procedure begins only after switching to any of the power
levels.
3.5
•
Software version 32/16.
•
If the burner is on and timers are active, holding the On/Off button for more
than 2 seconds deactivates the timers.
•
Loading first dose time increased to 240 seconds
•
Version screen displays software and hardware version of the controller, as
well as WiFi modem's software version if it is 24
or higher
17
15
3.6
•
Software version 34/16.
•
Main auger’s capacity increased to 350 kg/h.
•
Consumed pellets graphic's scales increased to 5, 10, 20, 40, 80 and 160
kg / h
•
Minimum value for ignition/extinction level of illumination set to 1
•
Ignition's level of illumination value must be higher than extinction's.
•
Added Russian language.
3.7
•
Software version 43/20
•
Switch mode choice between Standby, On and Timers
•
New menu” Select fuel” in User settings is added to select the fuel
profile
User Manual / ver 3.11
http://www.naturela-bg.com/en/
page 2 of 37
