23
Installation and Maintenance Manual
1.
Unplug the electric power connection, and shut o
ff
the water supply and
CO
2
supply
during maintenance or malfunction of the unit.
2.
The faucets and nozzles of the counter top unit should be wiped o
ff
on a daily basis
with a clean cotton rag or non-abrasive sponge and hot water.
3.
The Drip Tray should be emptied and cleaned with hot water on a daily basis. Be sure
to replace the Drip Tray to its proper location to collect condensation over
fl
ow during
normal machine operation.
4.
If using the 2 Tap Dispensing Tower, the tower, faucets, and nozzles should be wiped
o
ff
on a daily basis with a clean cotton rag or non-abrasive sponge and hot water.
5.
The 2 Tap Dispensing Tower Drip Tray should be emptied and cleaned with hot water
on a daily basis. Be sure to replace the Drip Tray to its proper location.
6.
The external stainless steel surface of the cabinet should be cleaned and polished
periodically with a non-abrasive cleaning solution or metal cleaner and a soft cotton
cloth.
7. When
the
CO
2
regulator gauge needle moves to the red section of the gauge, it is
necessary to replace the
CO
2
Cylinder to avoid disruption of the sparkling water
supply. IMPORTANT: IF THE
CO
2
CYLINDER IS LOW OR EMPTY, THE CARBONATION
LEVEL WILL BE LOW.
8.
Check the heat exchange water reservoir monthly. Add distilled or de-ionized water
until the water level is just below the Condensation Over
fl
ow Outlet. DO NOT
fi
ll to the
very top of the Reservoir. NOTE: Unplug the electric power before performing this
maintenance.
9.
Also view website for maintenance suggestions. (www.naturawater.com)
22. MAINTENANCE
:
SERIAL #
MODEL #
LOCATION :
MAINTENANCE RECORD
SERVICE DATE:
SERVICE TECHNICIAN
SIGNATURE
DESCRIPTION
