18
Installation and Maintenance Manual
The Water Leak Protection Device is an over
fl
ow safety device that controls the maximum
consumption of water between 5 and 50 liters.
Its function is to measure the volume of water that passes through it. If this volume exceeds
the set value, the Water Leak Protection Device stops the
fl
ow and stays in the safety
condition until user intervention.
1.
The device should be installed in a vertical orientation directly to the outlet port of the
Braided
Hose
2.
All connections are the “face seal” type, and should not be over tightened.
3.
The device is equipped with a valve adjustment.
4.
To adjust the device, separate the two black plastic housings.
5.
The adjustment location is on the external threaded end of the main housing.
6.
Insert the key provided into the adjustment slot .
7.
Turn the key until the valve is set at 1, 2, or 3. Do not exceed 3. This setting controls the
amount of water that is permitted to
fl
ow before the device trips and stops the water
fl
ow.
8.
Reassemble the two black plastic housings.
Water Leak Protection Device Reset
The Water Leak Protection Device is supplied with a Reset Adapter. This allows you to reset
the device if it has nuisance cycled. For example,
fi
lling a stock pot (more than 3 gallons)
without a pause.
To reset, simply push the red Reset Trigger. Due to line pressure, it may require some force to
depress the red Reset Trigger.
