background image

http://www.national.com

15

Customer Design Applications Support
National Semiconductor is committed to design excellence. For sales, literature and technical support, call the
National Semiconductor Customer Response Group at 1-800-272-9959 or fax 1-800-737-7018.

Life Support Policy
National’s products are not authorized for use as critical components in life support devices or systems without the express written approval 
of the president of National Semiconductor Corporation. As used herein:

1. Life support devices or systems are devices or systems which, a) are intended for surgical implant into the body, or b) support or 

sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can 
be reasonably expected to result in a significant injury to the user.

2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to 

cause the failure of the life support device or system, or to affect its safety or effectiveness.

National Semiconductor

National Semiconductor

National Semiconductor

National Semiconductor

Corporation

Europe

Hong Kong Ltd.

Japan Ltd.

1111 West Bardin Road

Fax: (+49) 0-180-530 85 86

13th Floor, Straight Block

Tel: 81-043-299-2309

Arlington, TX 76017

E-mail: europe.support.nsc.com

Ocean Centre, 5 Canton Road

Fax: 81-043-299-2408

Tel: 1(800) 272-9959

Deutsch Tel: (+49) 0-180-530 85 85

Tsimshatsui, Kowloon

Fax: 1(800) 737-7018

English Tel: (+49) 0-180-532 78 32

Hong Kong

Francais Tel: (+49) 0-180-532 93 58

Tel: (852) 2737-1600

Italiano Tel: (+49) 0-180-534 16 80

Fax: (852) 2736-9960

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said 
circuitry and specifications. 

National Semiconductor

®

 and 

N

®

 are trademarks of National Semiconductor Corporation.  All other trademarks are the property of their respective companies.

N

CLC-CAPT

-PCASM

Data Capture Boar

d User’

s Guide

Summary of Contents for CLC-CAPT-PCASM
















Reviews: