National Luna LEGACY Fridge Manual
12
Battery Protection Settings
On / Off Control
The refrigerator can be turned
ON
and
OFF
via the control panel.
Press and hold the button for 3 seconds
to turn the fridge
ON
or
OFF
.
If power to the refrigerator is interrupted, it will default
to
ON
automatically.
Note: When the fridge is switched off, the interior light will
still function if the unit is connected to a power source.
The refrigerator is equipped with a multi-level battery
protection circuit.
The user has the choice of three voltage levels at
which the compressor will shut down to protect against
excessive battery discharge. (See page 9)
To change the protection level, press and hold
the button until the preferred level is reached.
Selecting the
“Low”
cut-out setting can cause excessive discharge resulting in damage to the battery.
Note:
When changing the protection level the compressor will stop and restart 1 minute later (compressor
start delay). When powered by an AC source, the battery protection level can be changed, but will only
affect operation when the DC source is used.
Operating your Single Compartment Fridge
Main Control Panel
Automatic speed control
with TURBO over-ride
Battery protection control
Run status light
SET mode and
temperature DOWN control
Power ON/OFF and fridge
temperature UP control
Fault identifier light
