National Luna LEGACY Fridge Manual
19
A special feature of the
NL50 and NL52
is the ability
to change the direction in which the lid opens.
The most common configuration is the
front-opening direction (shown on the right).
If the application prevents the lid from opening fully or
the refrigerator is installed long ways into a vehicle, it may
be advantageous to use the side-opening configuration.
The Fridge is supplied in the front-opening configuration.
In order to change the lid direction, follow these steps :
1. Close the lid. Remove both front latches and
lid handles.
2. Re-fit one of the latches and lid handles to the
alternative latch positions on the side of
the refrigerator. (Keep the spare parts safe)
3. Remove all three hinges from the rear of the
refrigerator. Also remove the hinge cover plates from
the alternative hinge locations.
4. Re-fit two of the hinges on the side of the refrigerator.
5. Align the lid and ensure that it closes fully before
tightening the screws.
6. Keep the spare hinge and screws in a safe place.
The Fridge will now be in the side-opening configuration
NOTE:
Take care not to apply excessive pressure when
locating the screws to the inside retaining nuts.
(They can be pushed too far back or incorrectly
angled).
Tip - The optional protection jacket has a side pocket
which is ideal for keeping the spare hinge and latch
parts.
Dual-direction Lid (Models: NL50 & NL 52 only)
