background image

National Luna LEGACY Fridge Manual

16

The refrigerator can be turned 

ON

 and 

OFF

 via the 

control panel.
Press and hold the            button for 3 seconds 

to turn the fridge 

ON

 or 

OFF

.

If power to the refrigerator is interrupted, it will default 

to 

ON

 automatically.

Note: When the fridge is switched off, the interior light 

will still function if unit connected to a power source.

The user has the choice of three voltage levels 

at which the compressor will shut down to 

protect against excessive battery discharge.

To change the protection level, press and hold 

the          button until the preferred level is reached.
(Refer to page 9).

  Battery Protection Settings

  On / Off Control

Whenever the battery protection setting is changed, 

the compressor will stop and the 1 minute compressor 

start delay will be active.

Automatic speed control  

with TURBO over-ride

  Main Control Panel

Battery protection control

Fault identifier light

Individual run status lights

Left temperature display

Left SET mode and temperature UP / DOWN

Right SET mode and  

temperature DOWN control

Power ON/OFF and fridge  

temperature UP control

Right temperature display

Operating your Dual Control Fridge

Summary of Contents for LEGACY NL110





























Reviews: