Connecting Auxiliary battery cables
Cables to the auxiliary must be connected internally. It is necessary to remove the main cover for
this.
With the cover open, the remote temperature probe can be connected and battery type selected.
3
5
6
4
Unplug the main wire harness from the circuit.
The cover can now be completely removed.
cable-entry holes.
Use a screw-driver or flat tool to open the desired
2
Open the cover slightly and unplug the remote
monitor feed cable.
Fit standard cable grommets into the open holes.
Feed the auxiliary battery cables through the
grommets.
5
1
Remove the screws holding the cover on the left and
right-hand sides of the enclosure.
Remove the final two screws from the bottom.
