Connecting remote temperature sensor
6
The remote temperature sensor provides feedback to the system about the battery temperature.
This is used to ensure safe and full charge under a variety of ambient conditions.
The sensor should be placed onto the auxiliary battery for best results.
7
8
1
Remove the cover of the internal DC-DC system by
loosening two screws on top.
Connecting battery cables ... cont.
Make sure the terminal screw is tight.
Feed the positive battery cable through the grommet
and connect it to the top terminal of the main switch.
Tighten the cable grommets when done.
2
Connect the larger ring to the GND terminal.
Connect the smaller ring of the sensor to the terminal
marked "Sense".
Feed the remote temperature sensor wire together with the positive
or negative battery cables.
Tip :
Feed the negative cable to the terminal indicated.
Loosen the screw and insert the battery cable on top
of the existing cable.
Make sure the terminal is re-tightened.
Tighten the cable grommets when done.
