Remote Monitor - (Optional accessory)
Connecting the Remote Monitor
In addition to the selectable screen modes, the user is
able to increase or decrease the screen brightness and
choose to turn the display on or off.
The screen will turn off automatically when the system
is idle. It will turn on automatically when the next charge
cycle starts.
Information such as Main and Auxiliary battery voltages,
charge mode, charge current, battery type, battery
temperature and error conditions are displayed in a
choice of 3 user-selectable display modes.
The Remote Monitor provides status about the system
on a high-contrast LCD screen.
Lift the dirt cover on the Remote Monitor port.
Connect the square end of the monitor data cable
Press the plug until it clicks securely.
to the remote port as indicated
(fig 1)
.
It can fit in one direction only.
Connect the flat end of the data cable to the Remote
Monitor.
(fig 2).
This connector can fit both ways.
Locate the Remote Monitor in a convenient location
using the supplied mounting fixture.
Fig 2
Power
Screen mode
Brightness UP
Brightness DOWN
Fig 1
REMOTE MONIT
OR
10
