National Instruments VXI-AO-48XDC User Manual Download Page 56

Page: 56 / 58

Index

I-2

National Instruments Corporation

overview of digital I/O control, 4-3
power-on states of DIO lines, B-2
power-up condition, 3-8
specifications, A-2 to A-3
typical digital I/O applications (figure),

3-7

documentation

conventions used in manual,

how to use the manual set,

dynamic characteristic specifications, A-2

environment specifications, A-4
EPROM, serial number, 4-3
equipment, optional, 1-5
external calibration, 5-1 to 5-2

channel numbers (table), 5-2

hardware installation, 2-5
hardware overview

block diagram, 4-1
data transceivers, 4-2
I/O connector

digital I/O control, 4-3
nvRAM/DAC control, 4-2

serial number EPROM, 4-3
temperature sensor, 4-3
VXIbus interface circuitry, 4-2

ICH connection as current output (figure), 3-7
ICH<0..23> signal (table), 3-4
ICH<24..47> signal (table), 3-4
installation.

See also configuration

common questions, B-1 to B-2
hardware installation, 2-5

software installation, 2-6
unpacking VXI-AO-48XDC, 1-5

interface, VXIbus circuitry, 4-2
I/O connector

digital I/O control, 4-3
nvRAM/DAC control, 4-2
pin assignments

CH<0..23> connector (figure), 3-2
CH<24..47> connector (figure), 3-3

LabVIEW software, 1-3
LabWindows/CVI software, 1-3
logical address, VXIbus, 2-3 to 2-4

configuration, 2-3
switch settings, 2-4

manual.

See documentation

module configuration.

See configuration

NI-DAQ driver software, 1-3 to 1-4
nvRAM/DAC control, 4-2

optional equipment, 1-5

physical specifications, A-3
pin assignments

CH<0..23> connector (figure), 3-2
CH<24..47> connector (figure), 3-3

Port0_Line<7..0> signal (table), 3-4
Port1_Line<7..0> signal (table), 3-4
Port2_Line<7..0> signal (table), 3-4

Summary of Contents for VXI-AO-48XDC



























































Search results

Summary of Contents for VXI-AO-48XDC

Reviews:

National Instruments VXI-AO-48XDC, User Manual, Page: 56 / 58

Search results

Summary of Contents for VXI-AO-48XDC

Reviews: