Appendix A
Device-Specific Information
©
National Instruments Corporation
A-11
SCC Accessories
SCC provides portable, mod
u
lar signal conditioning to yo
u
r DAQ system.
To connect yo
u
r USB-6212/6216 Mass Termination device to an SCC
mod
u
le carrier, s
u
ch as the SC-2345, SC-2350, or SCC-68,
u
se an
SH68-68-EPM shielded cable. The SCC carrier m
u
st be externally
powered when
u
sed with a USB-6212/6216 Mass Termination device.
Refer to the
, and the
NI USB-621x Specifications
for more information.
Refer to the
SCC Configuration Guide
, available by going to
ni.com/
info
and entering the info code
rd
s
cav
, for more information.
BNC Accessories
Yo
u
can
u
se the SH68-68-EPM shielded cable, to connect the
USB-6212/6216 Mass Termination device to BNC accessories, s
u
ch as the
following:
•
BNC-2110
—Provides BNC connectivity to all analog signals, some
digital signals, and spring terminals for other digital signals
•
BNC-2111
—Provides BNC connectivity to 16 single-ended analog
inp
u
t signals, two analog o
u
tp
u
t signals, five DIO/PFI signals, and the
external reference voltage for analog o
u
tp
u
t
•
BNC-2120
—Similar to the BNC-2110, and also has a b
u
ilt-in f
u
nction
generator, q
u
adrat
u
re encoder, temperat
u
re reference, and
thermoco
u
ple connector
•
BNC-2090A
—Desktop/rack-mo
u
ntable device with 22 BNCs for
connecting analog, digital, and timing signals
Screw Terminal Accessories
National Instr
u
ments offers several styles of screw terminal connector
blocks. Use an SH68-68-EPM shielded cable to connect a USB-6212/6216
Mass Termination device to a connector block, s
u
ch as the following:
•
CB-68LP and CB-68LPR
—Unshielded connector blocks
•
SCC-68
—I/O connector block with screw terminals, general
breadboard area, b
u
s terminals, and fo
u
r expansion slots for SCC
signal conditioning mod
u
les
•
SCB-68
—Shielded connector block with temperat
u
re sensor
•
TBX-68
—DIN rail-mo
u
ntable connector block
