Chapter 1
Getting Started
1-8
ni.com
3.
Remove the USB cable from the connector on the USB-621
x
.
4.
Screw a #8 or M4 screw into the bottom point on the panel.
5.
Set the USB-621
x
on the screw by fitting it into the bottom screw notch
on the
u
nderside of the USB-621
x
.
6.
Screw a #8 or M4 screw thro
u
gh the USB-621
x
top screw hole into the
panel.
USB Device Security Cable Slot
(USB-621
x
BNC Devices)
The sec
u
rity cable slot, shown in Fig
u
re 1-3, allows
yo
u
to attach an optional antitheft device to yo
u
r USB device.
Note
The sec
u
rity cable is designed to act as a deterrent, b
u
t might not prevent the device
from being mishandled or stolen. For more information, refer to the doc
u
mentation that
accompanied the sec
u
rity cable.
Note
The sec
u
rity cable slot on the USB-621
x
BNC might not be compatible with all
antitheft cables.
