Index
I-2
ni.com
circuitry
analog, 4-2
digital control, 4-2
front connector signals (table), 2-3
front signal pin assignment (table), 2-2
CJC source/value, 3-1
cold-junction sensor connection, 2-6
common questions, D-1
common software-configurable settings
CJC source/value, 3-1
gain/input range, 3-1
channel properties, 5-4
SCXI-1102/B/C
settings in MAX
Traditional NI-DAQ (Legacy), 3-4
creating a virtual channel, 3-5
troubleshooting self-test verification, 1-6
verifying signal, 3-5
NI-DAQmx, 3-6
Traditional NI-DAQ (Legacy), 3-6
configuration and testing, 3-1
configuration settings, gain/input range, 3-1
configuring channel properties, 5-4
connecting
current-loop receivers, 2-9
RTDs, 2-9
thermocouples, 2-9
connecting SCXI-1102/B/C to E/M Series
See
E/M Series DAQ devices
connections, cold-junction sensor, 2-6
connector
front, 2-1
front signal pin assignments (table), 2-2
rear signal, 2-6
rear signal pin assignments (table), 2-7
conventions used in the manual,
creating a task
DAQ Assistant, 5-3
programmatically, 5-3
creating a virtual channel, 3-5
current measurement properties (table), 5-6
current-loop receivers, E-1
D
D GND signal
front signal pin assignment (table), 2-7
rear signal pin assignment (table), 2-7
DAQ Assistant, creating a task, 5-3
DAQ D*/A signal (table), 2-7
DAQ devices
cabling restrictions with plug-in E Series
low-level DAQ functions and multiplexed
unavailable digital lines, D-2
digital control circuitry, 4-2
digital settings, unavailable with DAQ device
digital signals on the SCXI-1102/B/C
documentation
conventions used in the manual,
National Instruments, 1-3
other application and material, 5-14
SCXI-1102/B/C, 1-3
