National Instruments SCXI SCXI-1102, User Manual

Page: 65 / 85

Appendix D Common Questions
SCXI-1102/B/C User Manual D-2 ni.com
Can I use the unused analog input channels of the E/M Series DAQ
device if I am directly cabled to the SCXI-1102/B/C, for example with
the SCXI-1180 feedthrough?
Yes. E/M Series DAQ device channels 1 through 7 are available when
directly connected to the SCXI-1102/B/C.
Which digital lines are unavailable on the E/M Series DAQ device if I
am cabled to an SCXI-1102/B/C module?
Table D-1 shows the digital lines that are used by the SCXI-1102/B/C for
communication and scanning. These lines are unavailable for
general-purpose digital I/O if the SCXI-1102/B/C is connected to the
E/M Series DAQ device.
Table D-1. Digital Signals on the SCXI-1102/B/C
E/M Series
DAQ Device
Signal Name
NI-DAQmx
SCXI Signal
Name
Traditional
NI-DAQ
(Legacy) SCXI
Signal Name
50-Pin
Connector
68-Pin
Connector Direction
1
DIO0 P0.0 SERDATIN 25 52 Output
DIO4 P0.4 SERDATOUT 26 19 Input
DIO1 P0.1 DAQD*/A 27 17 Output
DIO2 P0.2 SLOT0SEL* 29 49 Output
SCANCLK AI Hold Comp,
AI Hold
SCANCLK 36 46 Output
PFI7/
STARTSCAN
PFI 7/
AI SAMP CLK,
AI SAMP
HOLDTRIG 46 38 Input
EXTSROBE* EXTSROBE* SERCLK 37 45 Input
1
With respect to the E/M Series DAQ device.