National Instruments RMX-4120, User Manual

Page: 53 / 148

2-22 | ni.com
Chapter 2 Basic Functions
Interface
CF20 LAN interface parameter * ‡
3
B
CF21 Command language parameter * B
CF22 Emulation parameter during remote control * B
CF23 SCPI communication error display parameter * A
CF24 Multichannel (VMCB) domain number parameter * ‡
3
B or C
CF25 Multichannel (VMCB) channel number * ‡ 3 B or C
LAN 4
CF30 IP address display (1) * —
CF31 IP address display (2) * —
CF32 IP address display (3) * —
CF33 IP address display (4) * —
CF34 MAC address display (1) and (2) * —
CF35 MAC address display (3) and (4) * —
CF36 MAC address display (5) and (6) * —
CF40 Resets (LCI/DEF) or applies (APPL) the LAN settings. * A
CF41 IP address assignment method * ‡ B or C
CF42 Manual IP address setting (1) * ‡ B or C
CF43 Manual IP address setting (2) * ‡ B or C
CF44 Manual IP address setting (3) * ‡ B or C
CF45 Manual IP address setting (4) * ‡ B or C
CF46 IP address subnet mask prefix setting * ‡ B or C
CF47 SCPI-RAW protocol TCP port number * ‡ B or C
USB CF50 VID (vendor ID) display * —
CF51 PID (product ID) display * —
RS232C CF52 RS232C baud rate parameter * B
1
You can only specify this parameter when the RMX programmable power supply is being used as a master unit.
2 You can only specify this parameter only when the RMX programmable power supply is being used as a slave unit.
3 This parameter is affected only when the LAN interface settings are reset (CF40: dEF).
4 This parameter is displayed only when the LAN interface is in use (CF20: on).
Table 2-3. CONFIG Settings (Continued)
Display
Switching
Parameter
Number Description Effect Note