© National Instruments
|
2-33
RMX Programmable Power Supplies User Manual
CF21 Command Language Parameter
Selects the command language that is used in remote control messages. For the LAN interface
to function, this parameter must be set to "SCPi."
This parameter is applied when you turn the POWER switch off and on.
CF22 Emulation Parameter During Remote Control
Selects the emulation that is used during remote control. If you have set the command language
to legacy languages, you can only select “GEn” or “PAG.”
This parameter is applied when you turn the POWER switch off and on.
CF23 SCPI Communication Error Display Parameter
Selects whether to display communication errors. The errors are only displayed when you are
using the SCPI language.
Value
Parameter Description
SCPi
The SCPi language will be used (factory default setting).
LGCy
Legacy languages will be used.
Value
Parameter Description
nonE
Remote control is performed using the RMX programmable
power supply’s commands made by National Instruments
(factory default setting).
5700
Remote control is performed using the N5700/N8700 commands
made by Agilent Technologies.
GEn
Remote control is performed using the Genesys series commands
made by TDKLambda.
PAG
Remote control is performed using the PAG series commands
made by Kikusui.
dCS
Remote control is performed using the DCS series commands
made by Sorensen.
Value
Parameter Description
oFF
SCPI communication errors are not displayed (factory default
setting).
on
SCPI communication errors are displayed.