National Instruments RMX-400 Series, Programming Manual

Page: 114 / 181

RMX-4000 Series Programming Manual
114
125B
:RESistance:DYNamic:LOW:RISE/FALL
Channel-Specific
Command
Description
Sets the low range rising/falling slew rate for CR
dynamic mode for the specific channel.
Syntax :RESistance:DYNamic:LOW:RISE/FALL <NRf+>[A/µs]
Parameter <NRf+>[A/µs] Slew rate
RISE/FALL 0.8A/µs Sets the rising/falling slew
rate to 0.8 A/µs
RISE/FALL .1 Sets the rising/falling slew
rate to 0.1 A/µs
RISE/FALL MIN Sets to the slowest
rising/falling slew rate
RISE/FALL MAX Sets to the fastest
rising/falling slew rate
Example :RES:DYNA:LOW:RISE 0.1
Sets the rising slew rate
to ~ 0.1 A/µs.
Query Syntax :RESistance:DYNamic:LOW:RISE/FALL? [MIN|MAX]
Return Parameter <NR2> [MAX|MIN] Slew rate
1 unit=1 A/µs Returns the slew rate
MAX/MIN Returns the allowable
maximum and minimum
Query Example :RES:DYN:LOW:FALL?
MIN
0.8000
For low range dynamic
CR mode, the minimum
value for the falling slew
rate is 0.8 A/µs for the
specific channel.
126B
:RESistance:DYNamic:LOW:T1/T2
Channel-Specific
Command
Description
Sets the timers T1 or T2 for CR dynamic mode for
the specific channel in low range.
Syntax :RESistance:DYNamic:LOW:T1/T2 <NRf+>[S|ms]