10
|
ni.com
|
RMC-8357 Installation Guide
Rack Mounting
Caution
When mounting the equipment in the rack, do not create a hazardous
condition due to uneven mechanical loading.
The RMC-8357 rack mounting hardware includes:
•
One pair of inner slides to be installed on the chassis.
•
One pair of outer slides to be installed in the rack.
•
Two pairs of brackets (4 in. and 12 in.) for attaching the outer slides to racks of different
depths.
•
Bag of assorted fasteners.
Installing the Inner Slides
Install the inner slides to the RMC-8357 as shown in Figure 4.
Note
The following figure shows an example controller that may differ from
your product.
Figure 4.
Installing Inner Slides
1
Retaining Screw (x14)
2
Inner Slide
1
2
