National Instruments RMC-8357 Installation Manual Download Page 15 | Manualshive

Page: 15 / 20

National Instruments RMC-8357 Installation Manual Download Page 15

RMC-8357 Installation Guide

|

© National Instruments

|

15

DC Input

Input.................................................................. 23 to 36 V, 16 to 8 A ±10% per supply, 30 to

18 A total

Note

The connection to a DC mains supply is considered an energy hazard

and must not be in an operator access area. The DC product must be located in
a Restricted Access Location.

Caution

Use the DC power cable provided with DC power supplies for VDC input.

Caution

Using the RMC-8357 in a manner not described in this document may

impair the protection the RMC-8357 provides.

Power disconnect.......................................................The DC power cable provides main power

disconnect. Depressing the front panel power switch
enables or inhibits the internal power supply.

Mainboard

Socket ............................................................... LGA 2011

Chipset .............................................................. Xeon E5-2620 v4

Memory slots .................................................... Eight 240-pin DIMM DDR4 slots

PCI Express ...................................................... One PCI Express 3.0 x16 slot and

one PCI Express 3.0 x16 slot (half height)

SATA................................................................. Four SATA III ports

USB ports ......................................................... Four USB 3.0 ports, Two USB 2.0 ports

Video................................................................. VGA port (disabled by default), DVI,

DisplayPort, PCIe video graphics card

Serial................................................................. Two RS-232 serial port

LAN .................................................................. Two RJ45 LAN jacks

CPU

CPU .................................................................. Xeon E5-2620 v4 Eight Core

Clock speed....................................................... 2.10 GHz

Max turbo frequency ........................................ 3.0 GHz

Intel Smart Cache ............................................. 20 MB

Package............................................................. LGA 2011

«
...
13
14
15
16
17
...
»

Summary of Contents for RMC-8357





















Reviews:

No comments