14
|
ni.com
|
RMC-8357 Installation Guide
Note
You also may need to update or reinstall software after using the OS
reinstallation media to recover your OS. The OS reinstallation media may contain
drivers that are older or newer than the factory-installed version of the OS and may
not contain the latest RAID drivers. To ensure you have the latest drivers, go to
www.intel.com
and install the Intel Rapid Storage Technology (Intel RST) RAID
software package.
Cleaning
Caution
Always
disconnect the AC/DC power cable before cleaning or servicing
the chassis.
Exterior Cleaning
Cautions
Avoid getting moisture inside the chassis during exterior cleaning,
especially through the top vents.
Do
not
wash the front- or rear-panel connectors or switches. Cover these components
while cleaning the chassis.
Do
not
use harsh chemical cleaning agents; they may damage the chassis. Avoid
chemicals that contain benzene, toluene, xylene, acetone, or similar solvents.
Clean the exterior surfaces of the chassis with a dry lint-free cloth or a soft-bristle brush. Do
not
use abrasive compounds on any part of the chassis.
Specifications
This section lists the RMC-8357 electrical, mechanical, and environmental specifications.
Electrical
AC Input
Input voltage range ...........................................100 to 240 VAC
Operating voltage range....................................90 to 264 VAC
Input frequency .................................................50 to 60 Hz
Operating frequency range................................47 to 63 Hz
Current rating....................................................12 to 6 A max (750 W max single power supply)
Power disconnect ...................................................... The AC power cable provides main power
disconnect. Depressing the front panel power switch
enables or inhibits the internal power supply.