manualshive.com logo in svg

National Instruments RMC-8357, Installation Manual, Page: 18 / 20

Share
Download
National Instruments RMC-8357 Installation Manual Download Page 18

18

|

ni.com

|

RMC-8357 Installation Guide

Installation Category.........................................II

Pollution Degree ...............................................2

Acoustic Emissions

Sound pressure level (at operator position) ......<70 dBA

Safety

This product is designed to meet the requirements of the following standards of safety for test 
and measurement equipment:
•

IEC 61010-1, EN 61010-1

•

UL 61010-1, CSA 61010-1

Caution

Overloading the circuits may damage supply wiring. Do not exceed the 

ratings on the equipment nameplate when connecting equipment to the supply circuit. 

Note

For UL and other safety certifications, refer to the product label or the 

Online 

Product Certification

 section.

Online Product Certification

Refer to the product Declaration of Conformity (DoC) for additional regulatory compliance 
information. To obtain product certifications and the DoC for this product, visit 

ni.com/

certification

, search by model number or product line, and click the appropriate link 

in the Certification column.

Summary of Contents for RMC-8357





















Reviews:

No comments