GETTING STARTED GUIDE
NI PXIe-5650/5651/5652
RF Signal Generator
Note
Before you begin, install and configure your chassis and controller.
This document explains how to install, configure, and test the NI PXIe-5650/5651/5652
(NI 5650/5651/5652) as a stand-alone device. The NI 5650/5651/5652 is a continuous-wave
RF signal generator with modulation capability. The NI 5650/5651/5652 ships with the
NI-RFSG instrument driver, which you use to program the device.
To access NI 5650/5651/5652 documentation, navigate to
Start
»
All Programs
»
National
Instruments
»
NI-RFSG
»
Documentation
.
The specifications document for your device is installed with the driver software. Refer to
for the most recent specifications for your device.
Caution
The protection provided by this product may be impaired if it is used in a
manner not described in this document.
Hot Surface
If the NI 5650/5651/5652 has been in use, it may exceed safe
handling temperatures and cause burns. Allow the NI 5650/5651/5652 to cool before
removing it from the chassis.
Contents
Electromagnetic Compatibility Guidelines...............................................................................2
Verifying the System Requirements..........................................................................................2
Unpacking the Kit..................................................................................................................... 2
Preparing the Environment....................................................................................................... 4
Installing the Software.............................................................................................................. 4
Installing the NI 5650/5651/5652............................................................................................. 5
