4
|
ni.com
|
PXIe-4310 and TB-4310 (10V)/TB-4310 (600V)
–
Wire cutter
–
Wire insulation stripper
Documentation
–
PXIe-4310 and TB-4310 (10V)/TB-4310 (600V)
Getting Started Guide and Terminal
Block Specifications
–
PXIe-4310 User Manual
–
PXIe-4310 Specifications
–
PXI Express chassis user manual
You can download needed documents from
ni.com/manuals
.
Installation
Install the Software
Note
You must be an administrator to install NI software and devices on your
computer.
Ensure that the following software is installed before installing the PXIe-4310 and
TB-4310 (10V)/TB-4310 (600V) hardware:
1.
Your application software, such as LabVIEW, LabWindows
™
/CVI
™
, or .NET.
2.
NI-DAQmx—PXIe-4310 modules were first supported in NI-DAQmx 17.1.
Note
For detailed NI software version support, refer to the
NI-DAQmx Readme
.
Back up any applications before upgrading software or modifying the application.
Unpack and Install the Module
Remove the packaging and inspect the module. Contact NI if the module is damaged. Do not
install a damaged module.
Caution
The module is static sensitive. Always properly ground yourself and the
equipment when handling or connecting to the module.
Complete the following steps to install the PXIe-4310 module while referring to Figures 1 and 2:
Note
To maintain forced air cooling in the PXI Express system, refer to the
Maintain Forced-Air Cooling Note to Users
.
1.
Plug in your chassis before installing the PXIe-4310. The power cord grounds the chassis
and protects it from electrical damage while you install the module.
2.
Make sure the chassis is powered off.
