background image

PXIe-4310 and TB-4310 (10V)/TB-4310 (600V) 

|

© National Instruments

|

21

Storage Environment

Ambient temperature range .............................. -40 °C to 71 °C

(Tested in accordance with IEC 60068-2-1 and 
IEC 60068-2-2. Meets MIL-PRF-28800F 
Class 3 limits.)

Relative humidity range.................................... 5% to 95%, noncondensing

(Tested in accordance with IEC 60068-2-56.)

Shock and Vibration

Operating shock................................................ 30 g peak, half-sine, 11 ms pulse

(Tested in accordance with IEC 60068-2-27.
Meets MIL-PRF-28800F Class 2 limits.)

Random vibration

Operating .................................................. 5 Hz to 500 Hz, 0.3 g

rms

Non-operating........................................... 5 Hz to 500 Hz, 2.4 g

rms

(Tested in accordance with IEC 60068-2-64. 
Non-operating test profile exceeds the 
requirements of MIL-PRF-28800F, Class 3.)

Safety Voltages

Maximum Input Voltage

Connect only voltages that are within the following limits.

TB-4310 (10V)

AI+ to AI- ................................................. ±11 V
AI- to COM .............................................. ±11 V

TB-4310 (600V)

AI+ to AI- ................................................. 600 VDC/V

pk

, Measurement Category O;

300 V

rms

, Measurement Category II

AI- to COM .............................................. ±11 V

Summary of Contents for PXIe-4310

























Reviews: