![background image](http://html.mh-extra.com/html/national-instruments/pxi-8150-series/pxi-8150-series_user-manual_709564027.webp)
Chapter 3
PXI-8150 Series Configuration and Installation
©
National Instruments Corporation
3-5
PXI-8150 Series User Manual
Serial IRQ
You can use jumper settings on the PXI-8150 Series to connect INTP
on the PXI backplane to IRQ14 as well as INTS to either IRQ15 or to
serial IRQ. Refer to the documentation that comes with your PXI
peripheral device to see if you need to make any changes from the
default settings. For more information on Serial IRQ, refer to the
Serialized IRQ Support for PCI Systems Specification.
Figure 3-5 shows the INTP configuration options and Figure 3-6 shows
the INTS configuration options.
Figure 3-5. INTP Configuration
Figure 3-6. INTS Configuration
Installing the PXI-8150 Series
This section contains general installation instructions for the PXI-8150.
Consult your PXI mainframe user manual for specific instructions and
warnings.
1.
Plug in your mainframe before installing the PXI-8150. The power
cord grounds the mainframe and protects it from electrical damage
while you install the module.
W4
W4
a. No Connection (Default)
b. IRQ14
W3
W3
W3
a. Serial IRQ (Default)
b. No Connection
c. IRQ15