Index
PXI-8150 Series User Manual
I-4
©
National Instruments Corporation
Q
questions and answers, E-1 to E-3
R
RAM
adding RAM, A-4
common questions, E-2
installed system RAM, 3-3
SO-DIMMs from National Instruments
(note), A-4
type of memory in PXI-8150, 1-4
resources. See system resources.
S
SCSI hard drive, booting from, E-2
serial IRQ settings, 3-5
serial ports. See COM1 and COM2
connectors.
software from National Instruments, 1-7
specifications, A-1 to A-4
adding RAM, A-4
electrical, A-1 to A-2
environmental, A-4
physical, A-3
switches. See jumpers and switches.
system CMOS. See CMOS.
system resources, B-1 to B-4
DMA channel resource allocations
(table), B-2
I/O address map (table), B-3 to B-4
ISA interrupt resource allocations (table),
B-1 to B-2
PCI interrupts, B-1
system slot functionality, 1-5
T
technical support, F-1 to F-2
telephone and fax support, F-2
TNT4882C custom ASIC, 1-5
TX/RX LED, 1-5, C-1
U
Universal Serial Bus (USB)
location and pinout (figure), D-13
overview (table), 1-6
signals (table), D-13
V
VGA connector
location and pinout (figure), D-5
overview (table), 1-6
signals (table), D-5 to D-6
video. See also VGA connector.
plugging in after booting, E-1
type of monitor to use, E-1
video interface onboard PXI-8150, E-1
