Chapter 3
PXI-8150 Series Configuration and Installation
©
National Instruments Corporation
3-7
PXI-8150 Series User Manual
Figure 3-7. PXI-8156 Installed in a PXI Mainframe
How to Remove the Unit from the PXI Mainframe
The PXI-8150 is designed for easy handling. If you later decide to
change any of the jumper settings or the amount of DRAM installed on
the module, remove the unit from the PXI mainframe as follows:
1.
Remove the bracket-retaining screws in the front panel.
2.
Press the injector/ejector handle down.
3.
Slide the unit out of the mainframe.
1
Injector/Ejector Handle
2
PXI Board
3
PXI-8156 System Controller
4
PXI-1000 Chassis
5
Injector/Ejector Rail
8
7
6
5
4
3
2
1
ON
STANDBY
5
1
2
3
4
