8 Phase
Matrix
PXI-1430B
RF Downconverter Module
Quick Start Guide
Step 2-3. Connect to the Host Computer and Power Source
Embedded Controller
1
Connect the keyboard, mouse, monitor and any other external
devices to the PXI embedded controller.
2
Connect the chassis’ AC or DC inlet to the power source using an
appropriate power cable.
3
When the power switch is in the ON position, observe that fans
become operational.
4
If the power outlet does not have an appropriate ground connection,
connect the premise safety ground to the chassis grounding screw.
Refer to the chassis’ user manual at ni.com/manual for instructions.
PXI systems can be controlled from a
PC or laptop computer through a
software transparent link using
National Instruments’ PXI Remote
Controllers.
- PC control
of PXI consists of a
PCI/PCI Express board in the
computer and a PXI/PXI Express
module in slot 1 of the PXI system,
connected by a copper or fiber-optic
cable.
- Laptop computer control
of
PXI consists of an
ExpressCard/PCMCIA CardBus card
in the laptop and a PXI/PXI Express
module in slot 1 of the PXI system,
connected by a copper cable.
PXI Remote Controller
1
Install the PCI/PCI Express board in a PC or
insert the ExpressCard/PCMCIA CardBus card in a laptop computer.
2
Connect the chassis’ AC or DC inlet to the power source using an
appropriate power cable.
3
When the power switch is in the ON position, observe that fans
become operational.
4
If the power outlet does not have an appropriate ground connection,
connect the premise safety ground to the chassis grounding screw.
Refer to the chassis’ user manual at ni.com/manual for instructions.
(Step 2-4. Optional) Uninstall PXI Modules
Before uninstalling PXI modules, power off the PXI chassis!
When removing PXI modules from a chassis, ensure that you are
grounded with a grounding strap or are touching a grounded metal
surface. To avoid ESD, do not touch the exposed connector pins or any
exposed circuitry on the device. When not in use, PXI modules should
be stored in the original antistatic envelope to avoid damage.
