Quick Start Guide
Phase Matrix PXI-1430B RF Downconverter Module
23
IF B OUT
SMB (m) connector is used to output an IF signal. This
IF signal can be 100 kHz to 425 MHz when an IF signal is supplied
through the RF B IN connector and bypass mode is selected thereby
bypassing the down conversion circuitry.
When the down conversion circuitry is used, a 250 MHz IF signal is
output. This IF signal can be used as an input signal to the IF B IN input
connector of the PXI-1440B IF Downconverter Module.
This IF signal can also be supplied through the AUX IN connector of
the PXI-1420 MW Downconverter Module, thereby bypassing the
down conversion circuitry, so that the IF signal is available at the
IF A OUT of the PXI-1420 MW Downconverter Module;
this allows switching of the IF output signals between the
PXI-1420 MW Downconverter Module and the
PXI-1430B RF Downconverter Module without the use of the
PXI-1440B IF Downconverter Module.