National Instruments NI PXIe-8103 User Manual Download

Page: 52 / 75

Chapter 4

Common Configuration Questions

National Instruments Corporation

4-5

NI PXIe-8103 User Manual

Figure 4-2.

Installing a DDR2 SO-DIMM in an NI PXIe-8103 Controller

How do I flash a new BIOS?

You can download the new BIOS from

ftp.ni.com/support/pxi/

For more information, refer to KnowledgeBase 3H3COSD8.

Where do I get the latest software drivers?

The latest National Instruments software is available from

ni.com/

downloads/

. For peripheral drivers, refer to KnowledgeBase 3H3COSD8

ni.com

My NI PXIe-8103 does not have an internal floppy drive. Is there a way
to use an external drive?

Yes. The NI PXIe-8103 controller supports and can boot from USB floppy
drives. A USB floppy drive will not work with Windows NT4, but will
work with Windows 2000 or Windows XP. Refer to the

Boot Options

section for more information.

A USB floppy drive is available from National Instruments, part number
778492-02.

DDR2 SO-DIMM Module

DDR2 SO-DIMM Socket

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for NI PXIe-8103












































































Search results

Summary of Contents for NI PXIe-8103

Reviews:

Related manuals for NI PXIe-8103

Brands by name

Popular brands

National Instruments NI PXIe-8103, User Manual

Search results

Summary of Contents for NI PXIe-8103

Reviews:

Related manuals for NI PXIe-8103

Brands by name

Popular brands