National Instruments NI PXIe-8103 User Manual Download | Manualshive

Page: 22 / 75

background image

Chapter 2

Installation and Configuration

NI PXIe-8103 User Manual

2-6

ni.com

DMI Event Logging Submenu

Major errors that occur during the BIOS booting process are stored in
battery-backed memory on the controller, and remain there until you view
and clear them using this submenu. This logging capability allows a system
administrator to detect the historical occurrence of faults on a controller.
This submenu includes the following items.

•

View DMI Event Log

—This setting displays a window containing all

logged system errors and the time at which they occurred.

•

Mark DMI Events as Read

—This setting prevents any current

logged entries from being displayed again. However, all entries remain
in battery-backed memory, and you can retrieve them using other
DMI software that is beyond the scope of this document.

•

Clear All DMI Event Logs

—When set to

Yes

, this setting clears all

entries from the DMI event log on reboot.

•

Event Logging

—This setting controls whether events are logged.

Disabling logging has no impact on system performance. The default
is

Enabled

.

Advanced Setup Menu

This menu contains BIOS settings that normally do not require
modification. If you have specific problems such as unbootable disks
or resource conflicts, you may need to examine these settings.

Caution

Changing settings in this menu may result in an unstable or unbootable controller.

If this happens, follow the procedures outlined in the

System CMOS

section to restore

BIOS settings to their factory defaults.

The

Advanced

setup menu includes the following settings:

•

Reset Configuration Data

—A portion of the EEPROM on the

controller is designated as the Extended System Configuration Data
region (ESCD). The BIOS and Plug-and-Play operating systems use
this table to store the

Last Known Good

configuration of system

peripherals. If you experience resource conflicts or peripheral
malfunction, set this setting to

Yes

to force the BIOS to recreate the

ESCD on the next reboot. This is rarely necessary.

•

Integrated Peripherals

—Use this setting to bring up the

Integrated

Peripherals

submenu. Refer to the

Integrated Peripherals Submenu

section for more information.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

«
...
20
21
22
23
24
...
»

Summary of Contents for NI PXIe-8103












































































Reviews:

No comments

Related manuals for NI PXIe-8103

Brand: Palo Alto Network Pages: 56

Brand: National Instruments Pages: 85

Brand: A10 Pages: 52

Brand: IBM Pages: 63

Brand: Acqiris Pages: 22

Brand: SIIG Pages: 12

Brand: Cypress Semiconductor Pages: 11

Supero SAS-826A

Brand: Supero Pages: 16

Brand: Parker Pages: 50

Brand: Lanner electronics Pages: 59

Brand: UfiSpace Pages: 35

Brand: Point of View Pages: 13

Brand: Lutron Electronics Pages: 4

Through Hole Power Inductors 1411

Brand: Delta Electronics Pages: 1

Brand: mikroElektronika Pages: 2

Brand: Technics Pages: 20

Brand: Softing Pages: 16

Brand: Cypress Semiconductor Pages: 31

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands