![background image](http://html1.mh-extra.com/html/national-instruments/ni-9512-c-series/ni-9512-c-series_getting-started_3401836013.webp)
12
|
ni.com | Getting Started with NI 9512 Modules and AKD Servo Drives
Step 6: Connect the Motor and Encoder to the Drive
All servo motors available from NI come pre-wired for direct connection to the AKD servo drive
X2 motor connector and X10 feedback connector. Refer to Figure 7 for the location of the
connectors.
1.
Connect the motor 6-pin connector to the AKD servo drive X2 motor connector.
Note
The X2 connector also provides connection for the drive to control the +24 V
holding brake for motors that have a brake. Refer to the
AKD Installation Manual
for
information about using the holding brake.
2.
Connect the motor DSUB feedback connector to the AKD servo drive X10 feedback
connector.
Figure 7.
Motor and Encoder Connections
1
Motor Connector (X2)
2
Feed
b
ack Connector (X10)
2
1
Summary of Contents for NI 9512 C Series
Page 1: ...NI 9512...