Caution
To avoid permanent damage to the NI 5751/5751B, disconnect all signals
connected to the NI 5751/5751B before powering down the module, and connect
signals only after the adapter module has been powered on by the FlexRIO FPGA
module or controller for FlexRIO.
Caution
Connections that exceed any of the maximum ratings of any connector on
the NI 5751/5751B can damage the device and the chassis. NI is not liable for any
damage resulting from such connections.
Pinout and Signal Information
The following figure shows the pinout for the VHDCI connector.
8
|
ni.com
|
NI 5751/5751B Getting Started Guide
