Installing the NI 5751/5751B
Refer to the getting started guide for your FlexRIO FPGA module or Controller for FlexRIO
for instructions about how to install your FlexRIO system, including the NI 5751/5751B.
Cables
NI recommends using the SHC68-C68-D4 cable (part number 196275A-01) with the
NI 5751/5751B. This cable connects directly to the analog and digital connectors on the
NI 5751/5751B.
Front Panel and Connector Pinouts
The following figure shows the front panel connectors for the NI 5751/5751B.
Device Front Panel
Connector
Description
NI 5751
AI 0-15
CLK
IN
DI 0-7
DO 0-7
DI 0-7/DO-07 Digital input terminals (DI 0-7) and digital output
terminals (DO 0-7)
CLK IN
Sample Clock input
AI 0-15
Single-ended analog input channels
NI 5751/5751B Getting Started Guide
|
© National Instruments
|
7