4
|
ni.com
|
NI High-Speed Digitizers Getting Started Guide
–
USB cable (USB devices only)
–
NI SignalExpress media (USB devices only)
Note
SMC-based devices are based on the National Instruments Synchronization
and Memory Core architecture. For more information, refer to the
NI High-Speed
Digitizers Help
.
Other Required Items
In addition to the items contained in the kit, you need the following items:
1/8 in. flat-head screwdriver
One of the following configurations:
–
(PXI Devices)
A PXI chassis, a PXI/SCXI combination chassis, or a
PXI/CompactPCI chassis with a controller and the chassis documentation
–
(PXI Express Devices)
A PXI Express chassis with a controller and the chassis
documentation
–
(USB Devices)
A desktop or laptop computer and its documentation
–
(PCI Devices)
A desktop computer and its documentation
Note
If your application uses NI-TClk synchronization for PCI Devices, you must
use a RTSI cable to connect the PCI Device
S
. For more information, refer to
NI High-Speed Digitizers Help»Programming»Reference»NI-TClk
Synchronization Help
.
4. Installing the Software
Caution
Make sure you install the software
before
you install the hardware.
To install the software, complete the following steps:
1.
(Optional) If you are using an application development environment (ADE) such as
LabVIEW or if you are using a third-party tool, install it now. You
must
install the ADE
before installing the NI-SCOPE instrument driver.
2.
Install NI-SCOPE by inserting the NI-SCOPE media into the DVD drive. Click
Install
Software
in the displayed window.
Note
If the installation window does not appear automatically, navigate to the DVD
drive and double-click
setup.exe
.
3.
Follow the instructions in the installation prompts.
Note
You may see access and security messages during installation. Accept the
prompts to complete the installation.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com