NI High-Speed Digitizers Getting Started Guide
|
© National Instruments
|
13
Windows Device Recognition
Windows recognizes any newly installed device the first time the computer reboots after
hardware is installed. On some Windows systems, the Found New Hardware wizard opens with
a dialog box for every NI device installed.
Install the software automatically (Recommended)
is selected by default. Click
Next
or
Yes
to install the software for each device.
Note
(USB devices)
When you first install an NI USB-5132/5133, Windows will
recognize a new device. Click
Next
on any dialog boxes that appear to complete the
installation.
After Windows recognizes the newly installed device, a dialog box prompts you to select from
the following options, which may vary depending on the devices and software installed on your
system:
•
Begin a Measurement with This Device Using NI SignalExpress
opens SignalExpress.
•
Use This Device Interactively
launches the NI-SCOPE Soft Front Panel (SFP).
•
Begin an Application with This Device
launches LabVIEW.
•
Configure and Test This Device
opens MAX to your device so you can configure settings.
•
Take No Action
leaves your device in the system but does not launch an application.
6. Configuring and Testing in MAX
Note
(NI 5185/5186)
After you install the NI 5185/5186 in the chassis, the Access
LED will remain amber while the NI 5185/5186 is configuring device firmware and
initializing the device. During this time, the device is not available for user access.
When the Access LED changes to solid green, you can begin configuring the device
in MAX.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com