National Instruments Graphical User Interface Ultiboard User Manual Download Page 179

Page: 179 / 281

Chapter 5

Working with Traces and Copper

National Instruments Corporation

5-35

NI Ultiboard User Manual

Click on the second pin to complete the action.

Note

Error messages will display if the selected pins cannot be swapped, or if there is no

PINGROUP information for a pin.

Swapping Gates

This feature allows you to swap similar gates, and works for the following,
which are set in the

Pin & Gate Swapping Settings

area of the

Design

Rules

tab of the

PCB Properties

dialog box:

•

Internal Gates Only

—Allows gate swapping in the same IC only.

•

Advanced Swapping

—Allows gate swapping internally and between

similar ICs.

Group settings for swappable gates can be set into part groups in Ultiboard.
Each new part group will have its own swapping information, which
Ultiboard will follow.

Summary of Contents for Graphical User Interface Ultiboard


























































































































































































































































































Search results

Summary of Contents for Graphical User Interface Ultiboard

Reviews:

Related manuals for Graphical User Interface Ultiboard

Brands by name

Popular brands

National Instruments Graphical User Interface Ultiboard, User Manual

Search results

Summary of Contents for Graphical User Interface Ultiboard

Reviews:

Related manuals for Graphical User Interface Ultiboard

Brands by name

Popular brands