National Instruments FieldPoint FP-2000 User Manual Download Page 5

Page: 5 / 94

National Instruments Corporation

FP-2000/2010/2015 User Manual

Contents

Chapter 1
Overview of the FP-20

Network Module

FP-20

Hardware Overview.........................................................................................1-1

FieldPoint Software Overview.......................................................................................1-3
FP-20

Setup Overview ...............................................................................................1-4

Chapter 2
Installing the Hardware and Software

What You Need to Get Started ......................................................................................2-1
FieldPoint Safety Information .......................................................................................2-1
Mounting the FP-20

and Terminal Bases...................................................................2-4

Mounting the FP-20

on a DIN Rail..............................................................2-4

Connecting Terminal Bases with DIN Rail Mounting......................2-6
Removing the FP-20

and Terminal Bases from the DIN Rail.......2-6

Mounting the FP-20

to a Panel ....................................................................2-7

Connecting Terminal Bases with Panel Mounting ...........................2-8
Removing the FP-20

and Terminal Bases from the Panel ............2-10

Mounting I/O Modules onto Terminal Bases ................................................................2-10
Connecting the FP-20

to the Network........................................................................2-11

Wiring Power to the FieldPoint System ........................................................................2-13

Calculating Power for a FieldPoint Bank........................................................2-14

Connecting to Field Devices..........................................................................................2-15
Powering Up the FP-20

..............................................................................................2-15

Installing Software on the Host PC................................................................................2-15

Chapter 3
Hardware and Software Configuration

Configuring the FP-20

in FieldPoint Explorer ...........................................................3-1

Finding and Configuring Devices and Channels ..........................................................3-6
Saving Hardware Configuration as Power-Up State .....................................................3-10
Using Other Features and Options in Remote System Explorer ...................................3-11
Setting Up Security for the FP-20

..............................................................................3-12

Configuring Network Security ........................................................................3-12
Locking/Unlocking Settings in Remote System Explorer...............................3-13

Downloading Item Information to the FP-20

.............................................................3-14

Verifying the Configuration...........................................................................................3-14

Monitoring an I/O Channel .............................................................................3-14
Writing to an Output Channel .........................................................................3-15

Summary of Contents for FieldPoint FP-2000































































































Search results

Summary of Contents for FieldPoint FP-2000

Reviews:

National Instruments FieldPoint FP-2000, User Manual, Page: 5 / 94

Search results

Summary of Contents for FieldPoint FP-2000

Reviews: