National Instruments FD-11613, Manual

Page: 2 / 10

Documentation
Consult the following documents for information about the FieldDAQ device and the
NI-DAQmx driver. All documents are available on
ni.com/manuals ; help files install with the
software.
FD-11613/11614 Quick Start —Instructions for installing and configuring your
FieldDAQ device.
FD-11613 User Guide or FD-11614 User Guide —Information about your FieldDAQ
device.
FD-11613 Specifications or FD-11614 Specifications —Detailed specifications for
your FieldDAQ device.
NI-DAQmx Readme —Operating system and application software support in
NI-DAQmx.
NI-DAQmx Help —Information about creating applications that use the NI-DAQmx
driver.
NI-DAQmx C Reference Help —Reference information for NI-DAQmx C functions
and NI-DAQmx C properties.
Test Equipment
The following table lists the equipment required for calibrating your FD-11613 or FD-11614.
If you do not have the recommended instruments, use the minimum requirements to select
substitute equipment.
Table 2. Recommended Test Equipment
Equipment Recommended Model Minimum Requirements
Calibrator Fluke 5522A locked in the 3.3 V
range A high-precision voltage source with an
uncertainty of ≤70 ppm when sourcing
up to 50 µA.
Mini TC (x8) Omega SMPW-U-M U type
Test Conditions
The following setup and environmental conditions are required to ensure the FD-11613/11614
meets published specifications:
2 | ni.com | FD-11613/11614 Calibration Procedure