©
National Instruments Corporation
3
cRIO-9025 Operating Instructions and Specifications
Complete the following steps to install the controller on the chassis.
1.
Make sure that no power is connected to the controller or the chassis.
2.
Align the controller with the chassis as shown in Figure 3.
Figure 3.
Installing the Controller on the Chassis (Eight-Slot Chassis Shown)
3.
Slide the controller onto the chassis connector. Press firmly to ensure
the chassis connector and the controller connector are mated.
4.
Using a number 2 Phillips screwdriver, tighten the two captive screws
on the front of the controller to 1.3 N · m (11.5 lb · in.) of torque.
1
Controller
2
Captive Screws
3
Chassis Connector
4
Reconfigurable Embedded Chassis
1
4
2
3
NI cRIO-9025
CompactRIO Real-Time Contr
oller
DO NO
T SEP
ARA
TE CONNECT
ORS
WHEN ENERGIZED IN
HAZARDOUS LOCA
TIONS
SAFE MODE
CONSOLE OUT
IP RESET
NO APP
USER1
1: PO
WER
2: FPGA
3: ST
ATUS
4: USER1
INPUT
9-35 V
35 W
MAX
OFF
10/100
ACT/LINK
ACT/LINK
10/100
1
2
1 2 3 4
V1
C
V2
C
RESET
ON
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
