©
National Instruments Corporation
17
cRIO-9025 Operating Instructions and Specifications
Caution
Do not connect to signals or use for measurements within Measurement
Categories II, III, or IV.
Safety Standards
This product meets the requirements of the following standards of safety
for electrical equipment for measurement, control, and laboratory use:
•
IEC 61010-1, EN 61010-1
•
UL 61010-1, CSA 61010-1
Note
For UL and other safety certifications, refer to the product label or to the
Online
Product Certification
section of this document.
Electromagnetic Compatibility
This product meets the requirements of the following EMC standards for
electrical equipment for measurement, control, and laboratory use:
•
EN 61326 (IEC 61326): Class A emissions; Industrial immunity
•
EN 55011 (CISPR 11): Group 1, Class A emissions
•
AS/NZS CISPR 11: Group 1, Class A emissions
•
FCC 47 CFR Part 15B: Class A emissions
•
ICES-001: Class A emissions
Note
For the standards applied to assess the EMC of this product, refer to the
Online
Product Certification
section.
Note
For EMC compliance, operate this product according to the documentation.
CE Compliance
This product meets the essential requirements of applicable European
Directives as follows:
•
2006/95/EC; Low-Voltage Directive (safety)
•
2004/108/EC; Electromagnetic Compatibility Directive (EMC)
Online Product Certification
Refer to Declaration of Conformity (DoC) for this product for additional
regulatory compliance information. To obtain product certifications and the
DoC for this product, visit
ni.com/certification
, search by model
number or product line, and click the appropriate link in the Certification
column.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
