©
National Instruments Corporation
7
cRIO-9025 Operating Instructions and Specifications
3.
Enter a name for the RT target in the
Name
field.
4.
Select settings for the RT target in the
IP Settings
section, then click
Apply
.
Note
For information about configuring network settings, refer to the
Configuring
Network Settings
book of the
MAX Remote Systems Help
. In MAX, click
Help»Help
Topics»Remote Systems
. On the
Contents
tab, browse to
LabVIEW Real-Time Target
Configuration»
Co
nfiguring Network Settings
.
5.
When you click
Apply
, you are prompted to reboot the controller for
the changes to take effect. Click
Yes
. You can also reboot the controller
by right-clicking the name under
Remote Systems
and selecting
Reboot
.
6.
After rebooting, the controller appears under
Remote Systems
with
the assigned name. Expand the controller and select
Software
.
7.
Click
Add/Remove Software
in the toolbar to launch the LabVIEW
Real-Time Software Wizard.
8.
Install LabVIEW Real-Time software and device drivers on the
controller.
After software installation, the controller automatically reboots. You
can now program it using LabVIEW Real-Time. For information about
configuring the controller to launch an embedded stand-alone application
at startup, refer to the
LabVIEW Help
.
For more information about setting up the controller as an RT target, refer
to the
RT Getting Started Guide
, available on the host computer at
Start»
Programs»National Instruments»LabVIEW 8.x»LabVIEW Manuals
.
For more information about configuring the controller in MAX, refer to the
MAX Help
.
For information about installing and using LabVIEW FPGA, refer to the
LabVIEW FPGA User Manual
.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
